Verdict
The AS6702T is a 2-bay x86 NAS with two 2.5GbE ports; it is not a 10GbE NAS. Australian pricing varies by retailer and promotion; check the current diskless-unit price before purchase. Nothing else in Australia hits that combination at this price.
The caveats are real: ship with 4GB RAM (budget for the upgrade), 2-bay capacity limit, and ADM is behind DSM and QTS on software polish. For most Australian buyers who don’t specifically need 10GbE, the QNAP TS-264 at~$999 or Synology DS225+ at~$638 are better all-round 2-bay purchases. See our Asustor NAS Australia guide for the full lineup.
Ready to buy the Asustor AS6702T? This is our tracked Amazon AU affiliate link -- buying through it costs you nothing extra and supports independent, ad-free testing.
Compare all Asustor NAS models available in Australia with current AU pricing and use-case recommendations.
The AS6702T is a 2-bay NAS with two built-in 2.5GbE ports and no 10GbE support. It combines an Intel Celeron N5105, 4GB DDR4, two drive bays and two built-in 2.5GbE ports. No other 2-bay NAS at this price includes 10GbE natively. If 10GbE is the requirement and budget matters, the AS6702T is the starting point. The question is whether 2 bays and 4GB RAM are enough for your use case.
In short: The AS6702T is a 2-bay x86 NAS with dual 2.5GbE; it does not provide 10GbE. Limitations: 4GB RAM, 2 bays only, ADM software is less polished than DSM or QTS.
Specifications
| CPU | Intel Celeron N5105 (Jasper Lake, 4-core, up to 2.9GHz) |
|---|---|
| Architecture | x86-64 |
| RAM | 4GB DDR4 SO-DIMM installed (1x4GB); 2 slots total; maximum 16GB as 2x8GB. |
| Drive bays | 2x 3.5"/2.5" SATA (hot-swappable) |
| M.2 slots | 4x M.2 2280 NVMe, PCIe 3.0 x1. |
| Network (primary) | 1x 2.5GbE (2.5G/1G/100M) |
| Network (secondary) | 1x 2.5GbE |
| USB | 2x USB 3.2 Gen 2 (10Gbps). |
| HDMI output | 1x HDMI 2.0 |
| Power consumption | 21W operating, 13.5W disk hibernation, 0.79W sleep mode. |
| AU Price (Mwave) | $781 |
| AU Price (Scorptec) | $781 |
| Warranty | 3 Years (Australian distributor: Dicker Data) |
Why 10GbE in a 2-Bay NAS?
The AS6702T has two 2.5GBASE-T ports, which can be used individually or in supported aggregated and SMB Multichannel configurations. Sustained sequential performance from two HDDs in RAID 1 varies with the drives, workload and NAS configuration; benchmark the intended setup before choosing network speed. Across a 10GbE link (theoretical max ~1,100 MB/s), you saturate the drives rather than the network. For a RAID 1 HDD pair sustaining around 200-250MB/s, a single 2.5GbE link is already sufficient; a faster network link would not reduce HDD-limited transfer time. The difference versus 1GbE is substantial: moving a 100GB project file drops from ~14 minutes (1GbE) to around 7-8 minutes (10GbE, limited by spinning drives).
The benefit compounds if you add an NVMe SSD via the M.2 slot. Either as an all-flash primary volume or as SSD cache. ASUSTOR reports approximately 295MB/s over one 2.5GbE link and up to 591MB/s in optimized dual-2.5GbE SMB multichannel testing, which is transformative for local file transfers. This is what makes the AS6702T interesting for video editors, photographers, and others who move large files frequently between a workstation and their NAS. See our 10GbE networking guide for Australia for what you need in terms of switch and NIC.
ADM. Asustor’s Operating System
ADM (Asustor Data Master) is Asustor’s NAS operating system. It covers the core NAS use cases. SMB/NFS file sharing, Docker via Portainer or App Central, Plex Media Server (available as an app), and backup to external drives or cloud. It’s less polished than Synology DSM and less feature-rich than QNAP QTS, but functional for most home and small business NAS workloads.
ADM’s Docker support is via Portainer. The industry-standard Docker management UI. Rather than a custom container app. This is actually a more familiar interface for Docker-experienced users than QNAP’s Container Station or Synology’s Container Manager. x86 Docker images run without ARM compatibility issues. The AS6702T’s 4GB base RAM limits how many containers you can run simultaneously. Upgrade to 8-16GB for comfortable multi-container use. See our best Asustor NAS Australia guide for how ADM compares across the Asustor lineup.
AS6702T vs Adding 10GbE to Competing NAS Units
The closest alternative to the AS6702T is buying a QNAP TS-264 ($999-$1053 at PLE) and adding a 10GbE card. The TS-264 has one PCIe Gen 3 x2 slot and supports optional 10GbE through a PCIe expansion card. QNAP’s 4-bay TS-464 ($1,129) has a PCIe x2 slot for a 10GbE card, The all-in cost varies with the current TS-464 price and the specific compatible 10GbE expansion card selected. The AS6702T provides two built-in 2.5GbE ports and does not support 10GbE. No PCIe card required, no slot consumed.
AS6702T vs Competing 10GbE Options (AU)
| Asustor AS6702T | QNAP TS-464 + 10GbE card | Synology DS925+: dual built-in 2.5GbE; no PCIe 10GbE-card upgrade path. | |
|---|---|---|---|
| Total AU cost (approx) | $598 | $1,150-$1,300 | $1,040-$1,120 |
| Drive bays | 2 | 4 | 4 |
| 10GbE type | Not supported | PCIe card (slot consumed) | No PCIe 10GbE-card upgrade path |
| Built-in 2.5GbE ports | 2 | 2 | 2 |
| Base RAM | 4GB (max 16GB) | 8GB (max 16GB) | 4GB (max 32GB) |
| OS | ADM | QTS | DSM |
| Software quality | Good | Excellent | Excellent |
The 4GB RAM Limitation
The AS6702T ships with 4GB DDR4, which is below what we’d recommend for a NAS that will run Docker containers alongside file sharing. The AS6702T has two SO-DIMM slots and supports up to 16GB as 2 x 8GB. Use two compatible 8GB modules to reach the supported 16GB maximum; check ASUSTOR’s compatibility list and current Australian pricing. If you’re buying the AS6702T, budget for a RAM upgrade from day one.
For pure file sharing and backup without Docker containers, 4GB is workable. ADM’s footprint is light. But the 10GbE port’s value is partially unlocked by running high-throughput workloads. Plex transcoding, VM hosting, intensive Docker services. Which benefit from more RAM. Treat the RAM upgrade as part of the total cost.
Australian Considerations
Warranty and support. Dicker Data currently lists itself as an ASUSTOR distributor in Australia, and the AS6702T carries a three-year manufacturer warranty. Australian support arrangements and RMA turnaround times can vary by distributor and individual case, but Australian community-support availability varies by platform; buyers should check each vendor’s current support channels and relevant user forums.
10GbE switch cost. To use an AS6702T port at 2.5GbE, connect it to a 2.5GbE-capable switch or compatible network interface. Prices and availability for current 10GbE-capable switches vary; check current Australian listings before purchase. If you don’t already have a 10GbE-capable switch, factor in that cost. A direct connection can instead use one of the AS6702T’s 2.5GbE ports and a workstation interface that explicitly supports 2.5GbE. See our NAS networking guide Australia for configuration options.
CGNAT and remote access. Asustor provides EZ-Connect (their relay service) for remote access. EZ-Connect works on CGNAT connections without port forwarding, similar to Synology’s QuickConnect and QNAP’s myQNAPcloud. When direct access fails, EZ-Connect can use a relay connection, which may be slower, bandwidth-limited and incompatible with some applications.
Pros
- Dual built-in 2.5GbE ports; 10GbE is not supported
- Intel Celeron N5105 (x86). Docker without ARM limitations
- Dual 2.5GbE ports for separate or supported combined connections
- Four M.2 2280 NVMe slots for storage or cache
- RAM upgradeable to 16GB via two SO-DIMM slots (2 x 8GB)
- HDMI 2.0 output for direct media playback
- EZ-Connect relay works on CGNAT
Cons
- Only 2 drive bays. Storage capacity ceiling is lower than 4-bay alternatives
- Ships with 4GB RAM. Budget for a RAM upgrade at purchase
- ADM is less polished than DSM or QTS
- Four M.2 2280 NVMe slots (versus two on the QNAP TS-264 and TS-464).
- Asustor’s AU market presence is smaller than Synology or QNAP
- 10GbE value requires a 10GbE switch or direct workstation connection
Related reading: our NAS buyer's guide and our AU retailer guide.
Use our free NAS Sizing Wizard to get a personalised NAS recommendation.
Decided on the AS6702T? Our Verified Build Plans include compatible drive recommendations, RAID configuration, and first-boot setup. Matched to this exact NAS. $39 AUD, instant PDF.
See also: our complete Asustor NAS Australia guide.
How much does the Asustor AS6702T cost in Australia?
As of 18 August 2026, Scorptec lists the diskless AS6702T at $599; verify current pricing and stock before purchase. It is sold diskless. Drives are purchased separately. As of 18 August 2026, Scorptec lists two 4TB IronWolf drives at $638 total and the AS6702T at $599, for approximately $1,237 before any RAM upgrade. Budget an additional $55-$75 for a 16GB DDR4 SO-DIMM RAM upgrade if you plan to run Docker containers.
Does the Asustor AS6702T support 10GbE natively?
No. The AS6702T has two built-in 2.5GbE ports supporting 2.5G/1G/100M, and ASUSTOR states that 10GbE is not supported. Its two 2.5GbE ports can provide separate 2.5GbE connections or be used with supported aggregation and SMB Multichannel configurations. No PCIe card or additional hardware is required.
Can the Asustor AS6702T run Docker containers?
Yes. ADM supports Docker via Portainer, and the AS6702T’s Intel Celeron N5105 is an x86 processor. Meaning x86 Docker images run without ARM compatibility restrictions. The 4GB base RAM is a constraint for running multiple containers; upgrading to 8-16GB via the user-accessible SO-DIMM slot is recommended for Docker workloads.
How does the Asustor AS6702T compare to the QNAP TS-264?
As of 18 August 2026, Scorptec lists the AS6702T at $599 and PLE lists the TS-264-8G at $929; prices should be rechecked before publication. The AS6702T has four M.2 slots and dual 2.5GbE, but it does not support 10GbE. The TS-264 has no built-in 10GbE, but it does have one PCIe Gen 3 x2 slot for an optional 10GbE card. The TS-264 has higher base RAM (8GB vs 4GB), while the AS6702T has four M.2 slots compared with the TS-264’s two. For 10GbE, the AS6702T wins. For Docker, RAM, and software, the TS-264 wins.
Does the Asustor AS6702T work on CGNAT in Australia?
Yes. Asustor’s EZ-Connect relay service enables remote access without port forwarding, making it compatible with CGNAT connections (common on Aussie Broadband, TPG, and other Australian NBN providers). The EZ-Connect relay can be slower than a direct connection, is bandwidth-limited for browser relay access, and does not support every application. For reliable remote access on CGNAT, Tailscale via Docker is a recommended complement to EZ-Connect.